In other words, the higher the MTBF hours, the less likely your SSD will malfunction. For example, if the MTBF of your SSD is 1 million hours, it means its probability of failure is 0.03% within the warranty years, even if you use it at least eight hours every day-according to WePC. However, it doesn't predict how many hours your SSD will last, but it will tell you the probability of your SSD malfunctioning within the warranty period.
For instance, an SSD with a warranty of five years or 600TB TBW (Total Host Writes) will probably last longer compared to an SSD with three years warranty or 200TB TBW.Īnother factor that you could use to estimate the lifespan of your SSD is the MTBF (Mean Time Between Failures) hours provided by the manufacturer in the spec sheet. Of course, it doesn't mean that the warranty will reveal your SSD remaining life, but it could help you to estimate the probability of its failure. Most SSD manufacturers have a warranty that you could use to predict how long your SSD will probably last at the bare minimum. This is how much total data has ever been written to this drive.Įstimate Remaining SSD Lifespan Using Warranty and MTBF Hours Look at the top right for Total Host Writes (or it might just be Host Writes depending on your version).If it says anything else, then you may want to investigate further-but that's beyond the scope of this post. If it says Bad, the SSD life is over, and you would be lucky if it works if it hasn't failed already.However, if it says Caution, it means the SSD is degrading, and you should back up your files and replace it before it's too late.If it says Good, then you don't have anything to worry about yet.Under Health Status, it should also tell you the condition of your SSD.It should have a health percentage like a battery to inform you of the SSD's remaining life-the higher the Health Status percentage, the longer your SSD will last.
#SAMSUNG SSD HEALTH CHECK FREE#
It features enough information that it's actually useful and not overwhelming, and best of all, it's completely free to use.ĭownload: CrystalDiskInfo for Windows (Free, open-source)
#SAMSUNG SSD HEALTH CHECK SOFTWARE#
The only downsides of the software are that it won’t work on Linux-based systems and can’t perform firmware updates.CrystalDiskInfo is a really handy little program you can use to estimate the remaining lifespan of your SSD. You can also use it to do some minor adjustments of power management and notifications. You can check firmware updates, port details, buffer size, read and write speeds, power consumption, and S.M.A.R.T information. status of your disk, I suggest the smartctl tool, part of the smartmontool package (at least on Debian/Ubuntu). There are ways to list disks in Linux but to monitor the S.M.A.R.T. Of course, general information is also provided. Using smartctl to Monitor Status of your SSD in Linux.
It is one of the few free utility tools that have the ability to gather accurate data for both types of storage drives and work with drives from all manufacturers. Crystal Disk InfoĬrystal Disk Info is open source software which can give you health and temperature information for your SSD or HDD. Last but not least, if you aren’t pleased with the diagnostics results and your benchmarks, you can always optimize your Samsung SSD for your current OS with the OS Optimization feature in Samsung Magician. This will improve the overall performance, especially the read speed numbers. This mode can make use of 1GB of your system’s DRAM as cache for hot data or frequently-accessed data. What Samsung Magician offers through its RAPID mode makes it worth it even more. Optimization and diagnostics are just the tip of the iceberg.
0 kommentar(er)
